Author Topic: Footpegs- INT vs GT  (Read 830 times)

0 Members and 1 Guest are viewing this topic.

Silver650INT

  • Scooter
  • **
  • Posts: 12
  • Karma: 0
on: July 30, 2020, 07:19:10 am
The stock INT650 pegs stab me in the calves most of the time when I put my feet down. The GT pegs are set back and clear my ankles just fine. Has anyone tried to swap out the pegs between the two models?


Cat3625

  • Scooter
  • **
  • Posts: 49
  • Karma: 1
  • My need for speed
Reply #1 on: July 31, 2020, 06:49:32 am
Hitchcocks do a kit
PART No. 92787
FOOTREST ADJUSTMENT PLATE SET, 650 Interceptor
£55.00(Excl. VAT)
£66.00 (Incl. VAT)
     
Or fit a set of Yamaha folding pegs,from e bay, will require a bit of adjustment with a file to get them to lock correctly.
« Last Edit: July 31, 2020, 06:57:11 am by Cat3625 »
1966 Continental 250 GT
2001 Bullet 500 k/s
2002 Bullet 350 Trials
2008 Bullet 500 Classic electric start
2016 C5 Military 500 efi
2019 Interceptor 650
U.K.🇬🇧


Silver650INT

  • Scooter
  • **
  • Posts: 12
  • Karma: 0
Reply #2 on: July 31, 2020, 03:36:00 pm
THANK YOU....  I ordered the footplate kit.


Liberty Blacksmith

  • Scooter
  • **
  • Posts: 53
  • Karma: 0
Reply #3 on: September 23, 2020, 03:51:40 pm


I took the Rube Goldberg shifter off my Interceptor, foot peg and all; replacing it with a Continental shifter which comes directly from the transmission spline. Then I moved the passenger foot peg down to the bottom hole for the original foot peg. Ran a tap in there first and used a nut to lock it in. Works perfectly, shifts much better with a direct shifter and moves the peg down to more comfortable position.


Alek Smart

  • Scooter
  • **
  • Posts: 5
  • Karma: 0
  • 2020 Interceptor 650 - Dublin,Ireland.
Reply #4 on: November 12, 2020, 05:28:49 pm


I took the Rube Goldberg shifter off my Interceptor, foot peg and all; replacing it with a Continental shifter which comes directly from the transmission spline. Then I moved the passenger foot peg down to the bottom hole for the original foot peg. Ran a tap in there first and used a nut to lock it in. Works perfectly, shifts much better with a direct shifter and moves the peg down to more comfortable position.


Any photos of the new arrangement,Liberty B ?   


Liberty Blacksmith

  • Scooter
  • **
  • Posts: 53
  • Karma: 0
Reply #5 on: December 01, 2020, 06:02:46 pm


Any photos of the new arrangement,Liberty B ?


I do, will try to post. Your left foot is lower and further back, but I have gotten accustomed to it by now.

« Last Edit: December 01, 2020, 06:27:00 pm by Liberty Blacksmith »