Author Topic: Int 650 exhaust outer diameter  (Read 285 times)

0 Members and 1 Guest are viewing this topic.

dougodewitt

  • Neophyte
  • *
  • Posts: 36
  • Karma: 0
  • 2019 INT650 Baker Express
on: October 28, 2019, 01:54:25 AM
I'm shopping for an aftermarket exhaust, but nowhere in the handbook or the service manual does it give that dimension. I need to know what diameter slip on to buy. Thanks for your help!
RIDE, ride, NOW! Ride!


heloego

  • A 2x4. My kingdom for a 2x4!
  • Grand Gearhead
  • *****
  • Posts: 2,226
  • Karma: 0
Reply #1 on: October 28, 2019, 08:53:01 PM
I don't have a 650, but...

Measure the outside diameter of your pipe(s).
Any silencer you order should have a minimum inside diameter larger than your measured OD. The closer the better, but always larger.

Most, but not all silencers ordered should come with a set of two or three adapter rings so you can get a good fit.
'18 Bonneville T-100, Blue/White
'12 C5 Classic
'06 Electra X AVL w/32mm Mikuni and Gold Star system.


Adrian II

  • Grand Gearhead
  • *****
  • Posts: 1,597
  • Karma: 0
  • Sharing my ignorance with anyone who needs it
Reply #2 on: October 29, 2019, 01:09:51 PM
You could try measuring the pipe diameter.

A.
Grumpy Brit still seeking 500 AVL Bullet perfection! Will let you know if I get anywhere near...


Cat3625

  • Neophyte
  • *
  • Posts: 20
  • Karma: 1
  • My need for speed
Reply #3 on: November 01, 2019, 08:06:15 AM
Pipe pipe size 45/46 mm diameter
2002 Bullet 350 Trials
2008 Bullet 500 Classic
2016 C5 Military 500 efi
2019 Interceptor 650
U.K.based