not quite, there is a nut that will need to be removed on a bracket underneath up in the nacell. Remove the bracket and then yes. - Mike
Easiest way to get to the nut? Tried through the sides but was very difficult.
So I need help, when I turn lights on the amp meter slams into the negatives.
That means a wire is crossed some where or the part you installed is not plug N play
in other words, you've got a "hot" wiregoing directly to ground. Undo what you done did.... - Mike
Any time electricity goes directly from the power source (battery or alternator), directly to ground without going thru something and powering it, that is a bad thing.If the power goes thru a light bulb, ignition coil, ECU, guage or similar thing to make it operate, that is OK.
Page created in 0.11 seconds with 32 queries.