Unofficial Royal Enfield Community Forum

General Discussion => Tech Tips => Topic started by: Spitting Bull on October 16, 2007, 08:12:52 pm

Title: How to adjust the neutral finder
Post by: Spitting Bull on October 16, 2007, 08:12:52 pm

The stop beneath the neutral-finder lever is an eccentric rod with a bolt holding it in position.

Park the bike with some "packing" under the centre-stand, so that the rear-wheel is free to rotate. Loosen the bolt holding the eccentric, turn it so that the "big-side" is down. Now start the engine and engage second gear. Slowly pull the neutral-finder down till it slips out of gear. Turn the eccentric to stop the lever at that position. Tighten the bolt.

Tom

Title: Re: How to adjust the neutral finder
Post by: dewjantim on October 19, 2007, 09:46:48 pm

When mine slips out of adjustment I put it in neutral and adjust the lever all the way down....Dew.