Unofficial Royal Enfield Community Forum

Royal Enfield Motorcycles => Bullet with the UCE engine => Topic started by: AusG5 on November 12, 2012, 10:16:57 am

Title: Enfield G5 relays
Post by: AusG5 on November 12, 2012, 10:16:57 am
Gday guys
I have been working slowly on the enfield for abou 2 months now, and im prety much int he final stages of gettin her back on the road (will post photos as soon as it is done).

Part of the mods were to go for the old school toolboxes with all the electrics relocate dinto it. I knew taht once i took the spade terminals out, i would have to replace the relays blocks, which i have done. And when i went to attach them again, i made a quick diagram of which wire color went where, however, was oblivious to the fact that there is a slot which will need to stay empty, and i have no idea which one that is. Could i please trouble one of you fine gents/ladies to take photos of back of the relays so i can put them back on, or if someone can do a step further and possible draw up a quick sketch of wire color with respective position, obviously including the empty slot as well

Thanks in advance
Title: Re: Enfield G5 relays
Post by: singhg5 on November 13, 2012, 04:09:00 am
Are you talking about relays behind the left side chrome decor of G5 ?  Here are a couple of pictures of relays with wires attached to the back.



Title: Re: Enfield G5 relays
Post by: AusG5 on November 17, 2012, 04:31:34 am
that is exactly what i was after, you sir are a legend and a gentleman.

if your interested, keep an eye out for the finished photos
Title: Re: Enfield G5 relays
Post by: singhg5 on November 18, 2012, 03:36:33 am
Look forward to see photos of your RE as you complete the project.

Thanks for your kind words. It is nice to meet RE riders from all over the world on this website. I am learning from many great contributors who share their knowledge and experience on this Forum.

Regards.