3. need help with my bike
« previous next »
Pages: [1]   Go Down

Author Topic: need help with my bike  (Read 2001 times)

0 Members and 1 Guest are viewing this topic.

bal

  • Scooter
  • **
  • Posts: 4
  • Karma: 0
need help with my bike
on: July 04, 2020, 04:30:58 pm
hi i have 2007 old bullet 350cc  with electronic ignition causing me grief not starting at all I have decided to go back to point system but where do I find a wire goes to the point from wiring loom and colour of a wire please thanks
Logged

cyrusb

  • Kept man
  • Grand Gearhead
  • *****
  • Posts: 3,616
  • Karma: 2
  • There's a last time for everything
Re: need help with my bike
Reply #1 on: July 04, 2020, 05:16:54 pm
The wire from the points simply goes to the negative side of the ignition coil, and that's it. The color really doesn't matter. The points just ground the coil. Hope that helps.
« Last Edit: July 04, 2020, 05:37:10 pm by cyrusb »
Logged
2005E Fixed and or Replaced: ignition, fenders,chainguard,wires,carb,headlight,seat,tailight,sprockets,chain,shock springs,fork springs, exhaust system, horn,shifter,clutch arm, trafficators,crankcase vent.

bal

  • Scooter
  • **
  • Posts: 4
  • Karma: 0
Re: need help with my bike
Reply #2 on: July 04, 2020, 05:43:38 pm
thank you mate so the wire is there is black and white do i yes connect to Distributor Assembly as this wire shows 10.7 volts when  turn ignition on I know this is The Wire I need to connect to the point but I wanted to make sure 8)
Logged

Pages: [1]   Go Up
« previous next »
  3. need help with my bike
 


  • The Unofficial Royal Enfield Community Forum website is a fan-driven project, not affiliated with Royal Enfield Motors.

Page created in 0.067 seconds with 38 queries.