Unofficial Royal Enfield Community Forum

General Discussion => Tech Tips => Topic started by: Gordon on April 16, 2011, 07:51:10 pm

Title: 500 UCE Swingarm / Wheel on a CI or AVL Enfield
Post by: Gordon on April 16, 2011, 07:51:10 pm

Hi,

Would it be possible to use the UCE 500 swingarm /wheel onto the CI/AVL models as a direct fit?

I'm in a creative mood  ;)

Title: Re: 500 UCE Swingarm / Wheel on a CI or AVL Enfield
Post by: HMR on April 18, 2011, 11:00:57 am

The sprocket is on the other side, swingarm is longer, axle bolt is longer too.
HMR
Mumbai

Title: Re: 500 UCE Swingarm / Wheel on a CI or AVL Enfield
Post by: St1g9203 on February 21, 2014, 11:59:24 am

People have done it. Albeit by changing the whole bottom end..

Title: Re: 500 UCE Swingarm / Wheel on a CI or AVL Enfield
Post by: 1 Thump on February 21, 2014, 11:31:23 pm

Quote from: St1g9203 on February 21, 2014, 11:59:24 am

People have done it. Albeit by changing the whole bottom end..

Is that an AVL top end on a UCE bike?

Title: Re: 500 UCE Swingarm / Wheel on a CI or AVL Enfield
Post by: ace.cafe on February 22, 2014, 12:31:50 am

Quote from: 1 Thump on February 21, 2014, 11:31:23 pm

Is that an AVL top end on a UCE bike?

Yes, they do a lot of strange conversions like that in India, for no apparent reason.

Title: Re: 500 UCE Swingarm / Wheel on a CI or AVL Enfield
Post by: AVL Power! on February 26, 2014, 01:11:49 pm

Not really sure about this one but AVL users swap UCE heads and other parts because here the AVL spares are double the price when compared with UCE. I won't but many do it.