Unofficial Royal Enfield Community Forum
Royal Enfield Motorcycles => Bullet with the UCE engine => Topic started by: ScooterBob on December 02, 2009, 01:54:28 pm
-
This little beauty was spied outside the Skunk Werks at CMW ..... Hmmmmm - It doesn't look like an ORDINARY C5 ....... The boys may be up to something again!
-
Cool!, I like the bars.
-
And of course Scooter Bob had nothing to do with it, right?
-
Why such a narrow ramp?
;)
-
Since I am going to win that C5 in 9 days time, I have to ask, did the 19" front rim require wrenching on the mud guard?
-
Since I am going to win that C5 in 9 days time, I have to ask, did the 19" front rim require wrenching on the mud guard?
Cool! They're giving away two of them now? I'm winning one as well! :P
-
Since I am going to win that C5 in 9 days time, I have to ask, did the 19" front rim require wrenching on the mud guard?
Gentle Modification Techniques were used. Nothing larger than a three-pound sledgehammer or any bigger than a #2 cutting tip on the oxy-acetylene torch was used - Hahahaha!! It's pretty much a drop fit ...... ::)
-
A 19 for the front will be my next project, has to be better.
-
Well, Br. Scoot, the term awesome might just be an understatement... and, due to my curious nature, I have the two following questions:
1. Any chance of getting a true profile spy shot of Frankie?
2. Is a 19" rear tire in the Skunkworks Plan, also?
A very Merry Christmas and a Very Joyous and Prosperous New Year!
-
Hello everyone, I think that is the classic 350 which has 19" front wheel and is a carburetor fuel system and the handle bar looks like the same we get here in India on the C500 and 350.
-
Well, Br. Scoot, the term awesome might just be an understatement... and, due to my curious nature, I have the two following questions:
1. Any chance of getting a true profile spy shot of Frankie?
2. Is a 19" rear tire in the Skunkworks Plan, also?
A very Merry Christmas and a Very Joyous and Prosperous New Year!
Brother Juan - Hold that thought on the pic - I'll see if I can break into Hangar 13 again and not get caught ..... As for the 19" baloney on the rear - no plans as of yet - although I heard that someone at CMW was just losing their minds over the wide open space over the rear tyre. Aesthetics, you know .... stay tuned! (BTW - there might even be a higher compression forged piston for the UCE being tested - one can't tell whether it's THAT - or a .50 caliber machine gun popping .... you never know what's going on in Hangar 13 THESE days .... ::) )
-
"Brother Juan - Hold that thought on the pic - I'll see if I can break into Hangar 13 again and not get caught ..... As for the 19" baloney on the rear - no plans as of yet - although I heard that someone at CMW was just losing their minds over the wide open space over the rear tyre. Aesthetics, you know .... stay tuned! (BTW - there might even be a higher compression forged piston for the UCE being tested - one can't tell whether it's THAT - or a .50 caliber machine gun popping .... you never know what's going on in Hangar 13 THESE days .... ::))" ScooterBob
Br. Scoot, I thank you for your response, which I simply love and, naturally, deserves a huge...
WOWZAA, BABY!!!
-
Oh, Brother Juan .... You are SUCH a tease!! Heeheehee!!! ::)