Unofficial Royal Enfield Community Forum
Royal Enfield Motorcycles => Bullet with the UCE engine => Topic started by: AgentX on January 29, 2013, 03:24:59 pm
-
I'm installing a current model disc fork on my old iron barrel.
What's the proper arrangement of spacers on the axle?
From Hitchcock's diagram, from driver's right side, it seems it's fork leg, speedo drive directly against the fork leg, cylindrical spacer between the speedo and the hub bearing, hub, stepped bushing, left fork leg.
Correct?
-
Correct.
-
Thanks! There are, um, a variety of creative methods I've seen used here in India.