Unofficial Royal Enfield Community Forum

Royal Enfield Motorcycles => Bullet with the UCE engine => Topic started by: REA Member 131 on February 20, 2010, 10:57:08 pm

Title: seat removal on a G5 Deluxe
Post by: REA Member 131 on February 20, 2010, 10:57:08 pm

I'm allowed one real dumb question, so here goes. How does the seat come off on a fuel injected G5 Deluxe?

Does it share those bolts with the tops of the shocks?

I've ordered a solo seat, so I'm going to have to remove the seat.

Title: Re: seat removal on a G5 Deluxe
Post by: motomataya on February 20, 2010, 11:52:18 pm

Remove the 4 bolts that hold the rear grab rail. two have loose nuts. Then up and back.

Title: Re: seat removal on a G5 Deluxe
Post by: REA Member 131 on February 21, 2010, 01:53:05 am

A million thanks.  ;D

Title: Re: seat removal on a G5 Deluxe
Post by: singhg5 on February 21, 2010, 03:14:49 am

As Motomataya has mentioned, there are two bolts on each side of the seat, near the rear of the seat, that attach the seat to the frame.  These are the same bolts that hold the horizontal bar of the seat back rest (sissy bar).  Here is a link to the pictures.

http://www.enfieldmotorcycles.com/forum/index.php/topic,4215.msg47354.html#msg47354