Author Topic: Scanner  (Read 1055 times)

0 Members and 1 Guest are viewing this topic.

ODDBALL

  • Neophyte
  • *
  • Posts: 1
  • Karma: 0
on: August 26, 2024, 07:15:59 pm
My DIAGNOSTIC SCANNER, EURO 4 MODELS will not pair with the ECU on my 2012 500 Bullet EFI AND THE BIKE WILL NOT START. Any suggestions welcome.
Thanks.


SteveThackery

  • Inveterate tinkerer
  • Grand Gearhead
  • *****
  • Posts: 1,864
  • Karma: 0
  • "If it ain't broke, keep fixing it until it is."
Reply #1 on: August 26, 2024, 08:10:28 pm
Hi. This is the wrong forum - it's for technical tips rather than questions and answers. If you post your question in the UCE forum further up the home page, lots of people will read it and you are bound to get help.
Meteor 350

Previous:
'14 B5
'06 ElectraX (Good bike, had no trouble at all)
'02 500ES (Fully "Hitchcocked" - 535, cams, piston, etc - and still a piece of junk)

...plus loads of other bikes: German, British, Japanese, Italian, East European.