Hitchcock's has all the bits. They fit and are just a couple days away. The forged bits are in "accessories". I have one, it replaced an OEM unit that had "soft seized" on a gradual uphill on a coolish day. You don't have to think about the pistons personal comfort anymore with a forged unit.
OEM pistons are notoriously soft and have a dismaying variety of failure modes. The forged units bring the guts of the machine into the 21st century just like the modern machines. This particular piston is for the stock 6.5/1 CR as it retains the easy-going, easy-starting properties of the basic Bullet. There is a 8.5/1 version as well, but there are many practical reasons to stay with the stock CR. If you live in a summertime "hot" area (>105F/40C) maybe an alloy cylinder as well would be wise.
https://accessories.hitchcocksmotorcycles.com/23260?cont_shop=Shop-Engine-Upgrades&Model=500%20Bullet%20Indian%20Export%20SpecPART No. 90204
PISTON COMPLETE, STANDARD, FORGED, 84mm (Omega/Accralite)
£160.00
Product Details
PISTON COMPLETE, STANDARD, FORGED, 84mm (Omega/Accralite)
This is an English made forged piston which is a straight replacement for the standard piston. Made by Omega, it gives a very strong and robust piston without changing the standard compression ratio of approximately 6.5:1 It is supplied with rings, gudgeon pin and circlips.
Size = 84mm (STD)
Suitable for all 500 Bullets from 1953 EXCEPT: Electra X and EFI models. See ''Fitting Guide'' for details.