Unofficial Royal Enfield Community Forum
Royal Enfield Motorcycles => Bullet Electra & AVL => Topic started by: tooseevee on September 28, 2012, 01:13:41 pm
-
Will the long UCE flipout kicker fit the shaft on an '08 AVL 5-speed?
-
I'd like to know this as well. Like the way the UCE kicker folds out of the way of the leg.
-
I'd like to know this as well. Like the way the UCE kicker folds out of the way of the leg.
What a dummy I am at times ;D(http://)
I just went & looked in NField Gear:
http://nfieldgear.com/enfield-store/fold-away-kick-start-lever.html
I think why I didn't do that immediately is that I've found that a lot of items are not totally clear about what they fit & what they don't so I think of asking here first.
-
I have that CMW part on my AVL classic and it's a big improvement
-
If you care to do some file or dremel work, it'll fit a 4-speed, too. Just need to relieve the part of the bolt which passes through the interior of the splines.
-
Excellent; didnt even think to look at CMW. Adding it to my list of things to do.
Thanks Tooseevee