[Cube]

Greetings Enfieldistas,

Based on inquiries I've received regarding the 3D-printed Beeline Moto mount for the Enfield twins I posted a few weeks ago, and some observations from riding with it, I have completed a revised version that incorporates the following changes:

• Prints without support on an FDM printer. This will make it a lot easier to go from printer to useable part without doing as much post-processing.
• 5mm closer to the existing console, making it marginally easier to turn on and off the Beeline with a windscreen (I have the short OEM windscreen; I can't speak to how well it plays with anything else).
• An alternative version for those who are put off by the need to add a heat-set insert.

I also think it looks a bit nicer.



Details, files, and instructions are available on Github. Let me know if you have questions or feedback.

[JessHerbst]

Getting a ‘404’ trying to link to new file…

[Cube]

The link works for me, though there is no denying this forum software confounds me.

URL is https://github.com/Punk-Engineering/enfield-beeline

[Mort]

And this might make me bite the bullet on a Beeline.

Ok, who can I pay to print one of these for me. Please don't say "Shapeways". 

[JessHerbst]

Well done on the instructions. You have put a lot of good work into this.

[Blazingatom]

If anyone in the UK / europe wants one I work for a company called 3DPrint-uk.co.uk that can print them using selective laser sintering and can dye and polish.

[Greytop]

@Cube

Very impressive work and a very nice solution.
Thank you very much for making your efforts freely available too.

My Beeline is currently mounted between the clamps of my handle bars (see below) but I think your solution is more elegant and easier to eye ball too.

Thanks again.

[Toontje]

Looks nice. Ordered it from the printer.

[Toontje]

I'm happy. Thanks for designing this.

[Cube]

So glad you like it! Thanks for sharing your photos.

[JessHerbst]

Toontje, what is the green light below the Beeline?

[Toontje]

Toontje, what is the green light below the Beeline?

https://inforad.net/?product=inforad-moto-m1&lang=en
https://www.youtube.com/watch?v=kyYOQ3XuXnE

[Cube]

Interesting! Did you drill a hole in the finished print or put a hole in the model before you sent it to the printer? It integrates very nicely in the design.

[JessHerbst]

https://inforad.net/?product=inforad-moto-m1&lang=en
https://www.youtube.com/watch?v=kyYOQ3XuXnE

Interesting. In the State of Texas speed cameras are illegal.
https://www.dallasnews.com/news/politics/2019/06/03/gov-greg-abbott-signs-red-light-camera-ban-into-law/
 Maybe other states in the US as well but I really don’t know. Ive never encountered them in any State but.

[Toontje]

Interesting! Did you drill a hole in the finished print or put a hole in the model before you sent it to the printer? It integrates very nicely in the design.

I drilled a hole in the finished product. If you zoom in on the hole you can see that I didn't have a 12mm drill bit. I wiggled a 10mm drill bit around until the light came through.