Unofficial Royal Enfield Community Forum

Royal Enfield Motorcycles => Bullet Electra & AVL => Topic started by: tooseevee on September 28, 2012, 01:13:41 pm

Title: UCE Flipout Kicker
Post by: tooseevee on September 28, 2012, 01:13:41 pm

        Will the long UCE flipout kicker fit the shaft on an '08 AVL 5-speed?

Title: Re: UCE Flipout Kicker
Post by: DanB on September 28, 2012, 02:30:15 pm

I'd like to know this as well. Like the way the UCE kicker folds out of the way of the leg.

Title: Re: UCE Flipout Kicker
Post by: tooseevee on September 28, 2012, 03:14:19 pm

Quote from: DanB on September 28, 2012, 02:30:15 pm

I'd like to know this as well. Like the way the UCE kicker folds out of the way of the leg.

            What a dummy I am at times  ;D(http://)

              I just went & looked in NField Gear:

http://nfieldgear.com/enfield-store/fold-away-kick-start-lever.html

              I think why I didn't do that immediately is that I've found that a lot of items are not totally clear about what they fit & what they don't so I think of asking here first. 

Title: Re: UCE Flipout Kicker
Post by: Michael Marsceill on September 28, 2012, 05:05:55 pm

I have that CMW part on my AVL classic and it's a big improvement

Title: Re: UCE Flipout Kicker
Post by: AgentX on September 28, 2012, 05:31:11 pm

If you care to do some file or dremel work, it'll fit a 4-speed, too.  Just need to relieve the part of the bolt which passes through the interior of the splines.

Title: Re: UCE Flipout Kicker
Post by: DanB on September 29, 2012, 04:03:53 am

Excellent; didnt even think to look at CMW.  Adding it to my list of things to do.

Thanks Tooseevee