[Warwick]

Hi all
I am keen to take the DB reducers out of my S&S pipes. Is the process just unscrewing the screw at the rear of the pipe and it comes out or does it require anything else?
Cheers and beers
Warwick

[darmahman]

Make sure you don't drop the bolt down the pipe. I just pulled mine out but at most it might  take a pair of needle nose pliers.

[Tuchulcha]

I have to agree with Dharma-watch that little screw.  I took the baffles out of my S&S and the weld on one of the baffles came loose and dropped in the pipe.  Had to take it off and jiggle it out.

However-the S&S without baffles sounds great.

[Warwick]

Thanks for the advice guys. And OOOHHH do they sound great!!!

[Tuchulcha]

I honestly think they sound better without the db killers. 

[Bullyson_ContiGT650]

any idea how big the exhaust pipe connection point is?

I've been trying to order a muffler, but am not near my bike and can't find the measurement anywhere online...

is it a 1.5inch pipe? 1.75?

Please help!

[darmahman]

If it is for your 650 it will fit and it fits perfectly.

[jweber1957]

Did the EFI and intake require adjustment when you installed the S&S pipes?

[darmahman]

No - tho I am at 5000" altitude. That shouldn't matter tho.

[Tuchulcha]

The bike will adjust itself to the new pipes.  Just let it run at idle for about 10-12 minutes after you install them for the EFI to adjust the fuel/air mixture.