Author Topic: Headlamp ears  (Read 1057 times)

0 Members and 1 Guest are viewing this topic.

BRG-BIRD

  • Bulleteer
  • ***
  • Posts: 150
  • Karma: 0
on: March 26, 2020, 12:27:57 pm
Hello

Could someone measure the distance from the bottom of the headlamp ears (Interceptor) where they go around the fork tube to the top of the lower triple T, inches or metric is fine. Metric preferred actually. I installed fork gaiters the other night and did not measure this distance and am curious if they are mounted where they should be.

Thank you in advance :)
« Last Edit: March 26, 2020, 12:46:24 pm by BRG-BIRD »


George 350

  • Lifetime with bikes
  • Scooter
  • **
  • Posts: 48
  • Karma: 0
Reply #1 on: March 27, 2020, 04:27:28 pm
Hi,
Mine is a Conti, but the lower yokes are the same on both models. On mine the distance is 56mm. See attached.
2019 RE Continental GT 650
1978 Morini 350 Sport
1967 Norton 650


BRG-BIRD

  • Bulleteer
  • ***
  • Posts: 150
  • Karma: 0
Reply #2 on: March 27, 2020, 05:26:18 pm
Excellent thank you! :)


BRG-BIRD

  • Bulleteer
  • ***
  • Posts: 150
  • Karma: 0
Reply #3 on: March 27, 2020, 09:14:57 pm
Ok, got home and checked against the measurement George 350 posted, mine are set 2mm higher, not enough to worry about. Thank you again