Unofficial Royal Enfield Community Forum
Royal Enfield Motorcycles => Bullet with the UCE engine => Topic started by: Sub on July 31, 2010, 04:22:55 pm
-
Just did my oil change for the first time yesterday at 300 miles, and was prepared for the hell which ensues as one changes the oil filter cap. After completing it, I was wondering what all the fuss was about. I then realized that perhaps my cap is different:
(http://farm5.static.flickr.com/4112/4846010827_0c1a259acd.jpg)
(http://farm5.static.flickr.com/4133/4846632454_f789db967c.jpg)
It seems that I have a top locking bolt that others dont have?! Is this the nfieldstore version? http://nfieldgear.com/enfield-store/e-z-oil-cap-uce.html (http://nfieldgear.com/enfield-store/e-z-oil-cap-uce.html)
I'm curious why my bike has this, are they putting them on the new enfields now (I took delivery this month)?
I bought the (5x) filter kit as well and had the extra small oring to put in there, but I tried to remove the top hex bolt, but its ON THERE. I felt like I was going to shear something, so I decided to not force it and leave the old one on there - it looked perfect anyway.
BTW, a small tip for that pesky oring on top of the gold washer. Use a few very small dabs of grease (I used white lithium with a high temp rating) under the oring to keep it in place while inserting into the filter cavity. Also, make sure the inner oring (the one will inside the motor at other end of the filter) is seated well.
(http://farm5.static.flickr.com/4113/4846743486_ea8991fc2e.jpg)
-
Yep - you've got the new improved easy to get back on version there, you jammy bugger. I've still got the old booby trapped version. Trying to persuade Hithcocks to make the new ones, but I'm not holding me breath.... ::)
-
The newer C5's in India are also getting shipped with the updated ones.
-
Your oil filter cap is a NEW and IMPROVED version of what I got on my G5. And is much easier to take off or put it back !
A general impression that RE hardly changes anything or changes at the speed of a glacier is getting trashed !! Must be global warming. RE is responding pretty quickly to this one issue. Wish they send us one as a FREE UPDATE ;D
-
My local dealer was thinking about making his own version at $20 a pop. How many here would be interested in that?! :)
-
Could you make your own? I wonder.........
-
I brought the same setup from the Aussie distributor, looking at the photos, it seems straight forward, the only thing is that on the original setup there is a smaller brass? washer, I can't see that being used anywhere. Can anyone tell me if that washer is still used with the new setup or discarded. r80rt perhaps?
Cheers & thanks ???
-
Go ahead - Thank me for the "trick" showing up on the new production bikes ..... ;)
-
thanks! ;D
-
Hahaha! You're WELCOME - There are several ScooterBob modifications that have come out on the new bikes - and a LOT of them have come about from feedback on this very web board! It's ALL about making the Enfields into the best bikes on the Planet. As my dear Old Dad used to say:
"The biggest room in the world is 'room for improvement' ......"
He was right, too .............
-
Did my first oil change yesterday fearing putting it all back together but I also had a ScooterBob modded filter holder and it was a piece of cake :)
Thanks #2!
Scott