Author Topic: Cross Brand / Model parts compatability  (Read 3541 times)

0 Members and 1 Guest are viewing this topic.

Jack Straw

  • Grand Gearhead
  • *****
  • Posts: 1,680
  • Karma: 0
  • Prescott, Arizona
Reply #30 on: April 03, 2021, 11:08:52 pm
Splendid info.  Thanks to Aspina and NVDucati. 8)


  • Grand Gearhead
  • *****
  • Posts: 685
  • Karma: 0
  • SW USA
Reply #31 on: April 04, 2021, 01:17:31 am
Relays under left side cover can use Narva 68070BL 5 pin relay or Tridon TR039. Top left Main relay top right starter relay bottom left accessory relay and bottom right fuel pump relay.  Just from taken posts elsewhere, not actually required to try out any of it yet. I do have some Narva relays as spares under the seat now.

Another substitute of FAR higher quality are the Panasonic CM1-R-12V relays commonly available in the US.


  • Grand Gearhead
  • *****
  • Posts: 3,288
  • Karma: 1
  • USA 2020 INT
Reply #32 on: June 23, 2022, 01:33:22 pm
For a rear sprocket replacement I'd like to consider a "dual sprocket" from Moose or other suppliers.
From thier website:
    "Designed to outlast standard aluminum rear sprockets and is much lighter than steel rear sprockets
    Inner ring is made from 7075 T6 aluminum and the outer ring is made from heavy duty steel
    Self-cleaning mud grooves between each tooth to prevent dirt build up
    Inner rings are anodized; available in black, blue, green, orange, red and silver"

Naturally, they don't yet include the Royal Enfields in the drop down fitment list. Do we know which rear sprockets from other brands fit our bikes?
Member: AMA
Current Rides: '14 DL1000 ADV, '06 SV650N, '93 900CBRR, '74 Ducati 750GT, '06 ST1300PA

Alan F.

  • Scooter
  • **
  • Posts: 81
  • Karma: 0
  • We remember the Night Rider, & we know who You are
Reply #33 on: June 24, 2022, 03:11:47 am
That's a good question, I took a look at JT Sprockets latest catalog and no RE at all. Bummer.
North of Boston, MA - 2020 Orange Crush INT650