Unofficial Royal Enfield Community Forum

General Discussion => Campfire Talk => Topic started by: Talcecom on November 08, 2009, 12:49:50 am

Title: HCI Retro Dot 50 Helments are Back
Post by: Talcecom on November 08, 2009, 12:49:50 am
Check out the return of the Dot approved HCI retro helments for under $50.
[urlhttp://www.jafrum.com/motorcycle-helmets?search=HCI+DOT+50][/url]

http://www.jafrum.com/motorcycle-helmets?search=HCI+DOT+50
Title: Re: HCI Retro Dot 50 Helments are Back
Post by: Kevin Mahoney on November 08, 2009, 01:21:05 am
I would like to point out that they are available for less money in our store
http://store.royalenfieldusa.com/catalogsearch/result/?q=helmet&x=0&y=0 (http://store.royalenfieldusa.com/catalogsearch/result/?q=helmet&x=0&y=0)
Title: Re: HCI Retro Dot 50 Helments are Back
Post by: Slider on November 08, 2009, 01:55:57 am
What was the issue with the recall?



Title: Re: HCI Retro Dot 50 Helments are Back
Post by: Kevin Mahoney on November 08, 2009, 02:03:06 am
When the manufacturer tested them independently he found that they did not pass the puncture test. It has taken well over a year for the guy to deal with the govt agencies. Most of them he caught before the container even got here.
Title: Re: HCI Retro Dot 50 Helments are Back
Post by: abe on November 18, 2009, 02:54:42 pm
I bought a new HCI retro helmet and its pretty good, however it is a lot bigger than my old one I found.  I can see why the old style was not DOT approved but it looks a lot better on my big head since its smaller, now I have the traditional mushroom look going on.  The new helmet is warmer and has ear and neck flaps and is a bit less noisy. 

I am keeping the old one for hot summer days though, I know vanity over safety.......

abe
Title: Re: HCI Retro Dot 50 Helments are Back
Post by: UncleErnie on November 18, 2009, 03:26:40 pm
For my oval head, the HCI fits much better, and is also much quieter than the Davida.  With a little cosmetic modification, it looks just as good, too.

There seems to be some pricing variation depending on where you look in this site, though;  The link syas they're $40 but inside it says they're $90.  What's up there?

(http://i83.photobucket.com/albums/j315/UncleErnie/hci.jpg)
Title: Re: HCI Retro Dot 50 Helments are Back
Post by: UncleErnie on November 18, 2009, 03:28:46 pm
PS;  I've dealt with Jafrum and I wouldn't wish their customer service on anyone I liked.  THEY SUCK DOOR KNOBS!
Title: Re: HCI Retro Dot 50 Helments are Back
Post by: Blue Ridge Wheeltor on November 18, 2009, 05:53:48 pm
PS;  I've dealt with Jafrum and I wouldn't wish their customer service on anyone I liked.  THEY SUCK DOOR KNOBS!

I bought a leather jacket from them 6 yrs ago, and they were great. Price was right, jacket held up well, and it was quickly delivered.
Title: Re: HCI Retro Dot 50 Helments are Back
Post by: Cabo Cruz on November 18, 2009, 05:57:01 pm
PS;  I've dealt with Jafrum and I wouldn't wish their customer service on anyone I liked.  THEY SUCK DOOR KNOBS!

Br. Ernie, do they suck doorknobs as a rule or just as a habit?  :D
Title: Re: HCI Retro Dot 50 Helments are Back
Post by: jdrouin on November 18, 2009, 06:36:19 pm
For my oval head, the HCI fits much better, and is also much quieter than the Davida.  With a little cosmetic modification, it looks just as good, too.

Ernie, I like what you've done to the helmet. What kind of paint did you use? Does it stick well enough?

Jeff
Title: Re: HCI Retro Dot 50 Helments are Back
Post by: UncleErnie on November 18, 2009, 08:41:49 pm
Red pin stripe tape and clear coat.  It just needed to have the matt finish evened out to get a shiny look.  Some electrical tape around the edge.  Easy-peasy and Bob's your uncle.


When I got that helmet, the rear snap for the goggle stap stay would not un-snap.  I called customer service and they told me to be more firm.  I was and the whole assembly came right out of the helmet!  Another call;  "I'm sorry, but we can't offer refunds or exchanges on USED helmets"   Uh-huh.  I haven't worn it on the bike yet, and I was following YOUR directions.  'I'm sorry, but you abused the helmet and that voids any warranty." 

I'm still steamed.  I had to put a small bolt through the back of the helmet because I DO use that little strap.
Bernie, you lucked out. 
Bernie is lucky in so many things.
Title: Re: HCI Retro Dot 50 Helments are Back
Post by: The Garbone on November 18, 2009, 09:46:39 pm
Next time use a butter knife and sorta wedge it in there and pop her out... Its worked for me..
Title: Re: HCI Retro Dot 50 Helments are Back
Post by: Blue Ridge Wheeltor on November 18, 2009, 10:03:10 pm
Gosh Uncle,
You break the damn helmet and want a new one.
You break the aluminum tank baffle and expect them to fix it.
Next you'll break your real tail light switch and blame someone. ;D ;D ;D
Title: Re: HCI Retro Dot 50 Helments are Back
Post by: UncleErnie on November 18, 2009, 10:10:46 pm
How the heck did you know about that tail light?

Anyway, I've been all over this thing.  I'm going in deep when the light is better tomorrow. 


Did I tell you about that light?  Are you taking advantage of my dementia?  You'll get old someday- you just wait.  Ya know- you're either part of the solution, or part of the problem. 
Title: Re: HCI Retro Dot 50 Helments are Back
Post by: Blue Ridge Wheeltor on November 18, 2009, 10:14:15 pm
Unk,
You don't have to fix the tail light, because......














The way to ride, no one is ever BEHIND you... ;D ;D ;D ;D ;D ;D