I just went of a 60km ride. After fueling up, I turned on the ignition, no Eng. Man. light. the fuel pump primed and I started it as usual. I checked it and found the the low fuel light bulb and the engine man. light bulbs were flapping in the breeze attached to the wires. I put them back in place, now the EM light stays on solid, no codes flashing etc. I rode the bike back home normally, ran fine just that bloody light staying on. I'm thinking a short somewhere maybe up in the headlight or where I pushed the bulbs back in. Anyone else had this occur, any suggestions before I attack the headlight and wiring, not electrically minded.
Cheers