HPRE

Menu

Members Rides

Me and RE in the Garage


in
Members Rides

NField Gear

Welcome, Guest. Please login or register.
Did you miss your activation email?
September 02, 2015, 01:54:32 am

Login with username, password and session length

 

Author Topic: Handle bars on a G5 Military.  (Read 886 times)

Ragmas

  • Grease Monkey
  • ****
  • Posts: 354
  • Karma: 0
Handle bars on a G5 Military.
« on: August 31, 2010, 11:20:30 am »
I would like my bars to be pulled back a couple of more inches than they are.  The ones on the bike are stock 2009 G5 Military.  Does anyone know what bars would give a bit more pull back?

Thanks,

Sam
2009 G-5 Military
Little Falls, NY

UncleErnie

  • Grand Gearhead
  • *****
  • Posts: 2,545
  • Karma: 0
Re: Handle bars on a G5 Military.
« Reply #1 on: August 31, 2010, 11:35:33 am »
Most bike shops have a Tucker Rocky catalogue you can look in.  Bike Master bars are around $25 and have different shapes.  Measurements are given.
Run what ya brung

jjoe256

  • Grease Monkey
  • ****
  • Posts: 420
  • Karma: 0
Re: Handle bars on a G5 Military.
« Reply #2 on: August 31, 2010, 01:08:35 pm »
Here's a comprehensive catalog with measurements so take your pick. I wound up putting Kawasaki Police Bars on an Aprilia Falco street fighter!!

http://www.flandersco.com/about.html

ScooterBob

  • Grand Gearhead
  • *****
  • Posts: 2,566
  • Karma: 0
  • Yeah - I get it ....
Re: Handle bars on a G5 Military.
« Reply #3 on: August 31, 2010, 07:10:37 pm »
I would like my bars to be pulled back a couple of more inches than they are.  The ones on the bike are stock 2009 G5 Military.  Does anyone know what bars would give a bit more pull back?

Thanks,

Sam

P/N 560538 .......
Spare the pig iron - spoil the part!

3rdgear

  • Scooter
  • **
  • Posts: 51
  • Karma: 0
Re: Handle bars on a G5 Military.
« Reply #4 on: September 25, 2010, 08:07:49 pm »
Ragmas: did you find the bars you were looking for?  I'm in the same boat. Would like a bar like a beach cruiser bicycle might have.
« Last Edit: September 25, 2010, 08:10:08 pm by 3rdgear »

3rdgear

  • Scooter
  • **
  • Posts: 51
  • Karma: 0
Re: Handle bars on a G5 Military.
« Reply #5 on: September 25, 2010, 08:11:58 pm »
P/N 560538 .......

I searched for this part number on Flanders site.  Unable to find it.  If you could post a link, I would like to see what it looks like.

Thanks.

qgolden

  • Grease Monkey
  • ****
  • Posts: 303
  • Karma: 0
  • It takes a villiage to raise an idiot.....
Re: Handle bars on a G5 Military.
« Reply #6 on: September 25, 2010, 08:47:12 pm »
I searched for this part number on Flanders site. 

Aint a gonna' find it on the Flanders site, it is a NField part number.
Any other Enfields in New England?

Ducati Scotty

  • Grand Gearhead
  • *****
  • Posts: 6,736
  • Karma: 0
  • 2010 Teal C5
Re: Handle bars on a G5 Military.
« Reply #7 on: September 26, 2010, 12:42:01 am »
Remember, you may need longer cables if you get way outside the stock bend/length.

Scott

Ragmas

  • Grease Monkey
  • ****
  • Posts: 354
  • Karma: 0
Re: Handle bars on a G5 Military.
« Reply #8 on: September 26, 2010, 03:09:51 pm »
I have not found bars yet.  As it turns out I have a friend who has a friend with lots of motorcycle parts.  I am going to get an assortment from him and see if I can make a go at it.

Sam
2009 G-5 Military
Little Falls, NY