Author Topic: License plate holder.. and axle diameter?  (Read 1997 times)

0 Members and 1 Guest are viewing this topic.

Sub

  • Bob's Your Uncle
  • Grease Monkey
  • ****
  • Posts: 435
  • Karma: 0
  • 2010 Black Bullet C5
on: July 06, 2010, 04:31:50 am
Ordered this off eBay.. now I need to fab something up for mounting.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=200491432154#ht_500wt_956


I ordered the nfield LED tail light so I needed a way to mount the license plate. I'll have to fab something off the side to get this mounted. Hopefully it wont look to weird with two  brake lights?! This one looked too neat to pass up trying. If it does look funny together, I'll choose one of the brake lights and perhaps end up cutting the light off the license plate bracket. We'll see!

On a side note, do we have a .75 or 1" axle?
« Last Edit: July 07, 2010, 01:54:27 am by Sub »


Ragmas

  • Grease Monkey
  • ****
  • Posts: 358
  • Karma: 0
Reply #1 on: July 06, 2010, 04:13:04 pm
I'll betcha its metric whatever it is.  ;)

Sam
2009 G-5 Military
Little Falls, NY


ERC

  • Grand Gearhead
  • *****
  • Posts: 1,810
  • Karma: 0
Reply #2 on: July 06, 2010, 11:39:56 pm
The rear axle is 16.94 mm.  ERC
2-57 Apaches, 2-57 Trailblazers, 60 Chief, 65 Interceptor, 2004 Bullet, 612 Bullet chopped.


qgolden

  • Grease Monkey
  • ****
  • Posts: 302
  • Karma: 0
  • It takes a villiage to raise an idiot.....
Reply #3 on: July 07, 2010, 01:09:47 pm
I like that taillight, a lot!

Send us a picture when you get it mounted...
Any other Enfields in New England?


r80rt

  • C5 Pilot
  • Grand Gearhead
  • *****
  • Posts: 2,986
  • Karma: 0
  • R.I.P Papa Juan, Uncle Ernie
Reply #4 on: July 07, 2010, 01:49:58 pm
Model A Ford, one of my favorite tail lights, I had one on my Cj750 and it looked great. Good Choice.
On the eighth day God created the C5, and it was better looking than anything on the planet.
Iron Butt Association