First of all thank you for the compliments.
I did not come because I could not find a section for presentations.
I would also say that I find very difficulty in reading the letters for verification of message to send.
Step to answer the questions:
- bags have been constructed using an aluminum sheet with a thickness of 1.2 millimetri.Shaped by hand with a rubber mallet as he sensed Barenekd .
-the last my creature is the roll -tools that I installed behind the passenger seat .
- the bike is a B5 Standard and , among other things , I changed the tank with one of Chrome on a site purchased online . The petrol tank is indian made and done completely by hand.
- I put the solo seat because I like the most and am in tune with the ancient line of moto.For to install the seat back frame I built a very imile to that of the Classic Crome or to prevent the weight can become a burden on fender.
the gold - striped on front and rear fenders and battery cover have been made of thin PVC adhesive from a craftsman who builds self-adhesive labels and advertising signs . I also built the stainless steel edge protection on the lids of the battery cover.
-The fish-tail end in not attached to the OEM silencer, but the silencer but was completely built in stainless steel, using stainless steel tubes.I built the terminal using a stainless steel sheet made from a tray for dentist ( borrowed from my brother
).I found that very ductile metal
- I also built in aluminum plate holder and the fron number plate in iron.
-also the side stand is made of stainless steel.
I post some pictures;