ok.. the blue and white wires are self explanatory plug and play.
Now the other 2 wires that are coded green going in the relay and out with the white connector and the black connector , they too, are self explanatory... they go to the switch that connects to the side stand..
However I took the switch off the side stand because the wires got cut in shreds from something, the side stand , the center stands, rodents, I don't know.. .
My question is __do I connect the two green wires together.. the white male connector going to the black female connector to make a closed loop__or do I just tape them off and leave them open, of course using tape to seal the ends__or will I have to put the switch back on the side stand?
thanks in advance