on: December 11, 2007, 03:19:35 am
Adjusting my valves I noticed the black paint on the inside of the finned cover was blistering and falling off. I had seen the bumps a while back but thought they were in the casting. Just a heads up if you have this cover. I replaced mine with the $3 blem from cmw.
Logged
2005E Fixed and or Replaced: ignition, fenders,chainguard,wires,carb,headlight,seat,tailight,sprockets,chain,shock springs,fork springs, exhaust system, horn,shifter,clutch arm, trafficators,crankcase vent.
Topic: Lifter cover paint flakes (Read 3041 times)