Author Topic: UCE Sprocket spline question ?  (Read 2060 times)

0 Members and 1 Guest are viewing this topic.

chinoy

  • Bulleteer
  • ***
  • Posts: 242
  • Karma: 0
on: February 15, 2010, 04:58:59 am
Can sprockets from the older bullets be used on the UCE ?
What front sprocket options are there for the UCE front and rear ?


t120rbullet

  • Grand Gearhead
  • *****
  • Posts: 1,967
  • Karma: 0
Reply #1 on: February 15, 2010, 11:46:10 am
Can sprockets from the older bullets be used on the UCE ?
What front sprocket options are there for the UCE front and rear ?


The UCE front sprocket is different than the older 5 speed sprocket. As far as I know there are only 2 sizes available, 17 & 18.
Not much room for anything larger in there.

The rear is not replaceable (at least on the US models) and is I believe 38 teeth.
There is a kit that will make the rear replaceable with larger sprockets but I don't know if it will fit the UCE or not.
http://store.royalenfieldusa.com/changeable-rear-wheel-sprockets
CJ
1972 FLH "Sambo"
1999 Enfield 500 Black Deluxe "Silver"
2023 Guzzi V7 Special "BOB"