Hum, the 30mm amal on mysixty-five is doing a fine jobin those three most importantcategories. Idle, roll on, and pegged.//and I'm not even selling them/merrill
And remember, you guys! I can't guarantee how well that stock bottom end is going to hold up with higher power. There is some risk involved. Holding the rpms down under 5000 rpm will go a long way to helping it, and our very light piston will help a lot too. But the stock internal parts are what they are, which is to say "unpredictable in manufacturing quality and assembly". So, you have to take that into consideration.
Page created in 0.089 seconds with 36 queries.