Author Topic: well if I had an extra 5 grand laying around  (Read 1794 times)

0 Members and 1 Guest are viewing this topic.

scoTTy

  • Grand Gearhead
  • *****
  • Posts: 2,473
  • Karma: 0
on: February 02, 2010, 12:13:53 am
, but then I would have to spend more for a bigger garage or a barn

http://www.motorcycleclassics.com/black-side-down-mustang-motorcycles-are-back.aspx


r80rt

  • C5 Pilot
  • Grand Gearhead
  • *****
  • Posts: 2,986
  • Karma: 0
  • R.I.P Papa Juan, Uncle Ernie
Reply #1 on: February 02, 2010, 12:34:03 am
When I was a kid in California the cool kid down the street had a Mustang, It was glorious, I was so envious. :D
On the eighth day God created the C5, and it was better looking than anything on the planet.
Iron Butt Association


motomataya

  • Grease Monkey
  • ****
  • Posts: 371
  • Karma: 0
Reply #2 on: February 02, 2010, 01:01:49 am
That looks like a honda clone pushrod motor from china. That bike should be about $2500 if I am right


bob bezin

  • Grand Gearhead
  • *****
  • Posts: 1,189
  • Karma: 0
  • I ride therefore I am.
Reply #3 on: February 02, 2010, 07:08:54 pm
149cc? the original was 320cc. the new one should be at least 450 or 500 cc.149cc is not going anywhere. looks great thou.
2000 RE classic ,              56 matchless g80
2006 RE delux fireball       86 yamaha SRX 600                       
2015 indian chief vintage
65 500cctriumph
04 bonnie black
71 750 norton.
48 whizzer


cyrusb

  • Kept man
  • Grand Gearhead
  • *****
  • Posts: 3,616
  • Karma: 2
  • There's a last time for everything
Reply #4 on: February 02, 2010, 07:52:30 pm
Looks like a good home for an unused Bullet engine..
2005E Fixed and or Replaced: ignition, fenders,chainguard,wires,carb,headlight,seat,tailight,sprockets,chain,shock springs,fork springs, exhaust system, horn,shifter,clutch arm, trafficators,crankcase vent.


motomataya

  • Grease Monkey
  • ****
  • Posts: 371
  • Karma: 0
Reply #5 on: February 02, 2010, 09:31:39 pm
That would be neat if the frame was bigger. The Mustang is about half way between a minibike and a small motorcycle. I don't think an Enfield motor would fit.