Red pin stripe tape and clear coat. It just needed to have the matt finish evened out to get a shiny look. Some electrical tape around the edge. Easy-peasy and Bob's your uncle.
When I got that helmet, the rear snap for the goggle stap stay would not un-snap. I called customer service and they told me to be more firm. I was and the whole assembly came right out of the helmet! Another call; "I'm sorry, but we can't offer refunds or exchanges on USED helmets" Uh-huh. I haven't worn it on the bike yet, and I was following YOUR directions. 'I'm sorry, but you abused the helmet and that voids any warranty."
I'm still steamed. I had to put a small bolt through the back of the helmet because I DO use that little strap.
Bernie, you lucked out.
Bernie is lucky in so many things.