Author Topic: Aluminum center stand.....  (Read 4168 times)

0 Members and 1 Guest are viewing this topic.

dewjantim

  • Grease Monkey
  • ****
  • Posts: 430
  • Karma: 0
on: October 30, 2007, 05:40:39 pm
Does anyone know if an aluminum center stand from the 500-750 twin cylinder REs will fit my classic bullet......Dew.
If it hurts, you're not dead yet!!!!!


c1skout

  • Grease Monkey
  • ****
  • Posts: 276
  • Karma: 0
Reply #1 on: October 31, 2007, 12:26:53 am
I think a lot of the early (british) bullets had the aluminum stands. Hard to say though just looking at pictures.


Sam

  • Uralist & now, Bulleteer!
  • Bulleteer
  • ***
  • Posts: 195
  • Karma: 0
Reply #2 on: October 31, 2007, 12:43:53 am
the one on fleabay, right? Nice looking piece. I guess you know this, but you could ask the seller for the critical dimensions; outside to outside on the mounting lugs, ID of the hole, inside to inside mounting lugs, and height. A photo with a ruler would give you all but one of those.

I'll be interested to hear if it fits, and I promise I won't bid against you.
<Insert cryptic saying by obscure author here>


RagMan

  • Bulleteer, Uralist &
  • Grand Gearhead
  • *****
  • Posts: 819
  • Karma: 0
Reply #3 on: October 31, 2007, 01:37:21 am
If it were from a British Enfield, would not the alloy be Aluminium and not aluminum ;) ;)
« Last Edit: October 31, 2007, 04:42:01 pm by IndianaBulleteer »
aka Indiana Bulleteer.
''99 Classic Bullet. '05 Ural Tourist sidecar rig, converted to 2wd. '05 Harley Davidson Sportster.
Jefferson County, WA


dewjantim

  • Grease Monkey
  • ****
  • Posts: 430
  • Karma: 0
Reply #4 on: October 31, 2007, 12:49:43 pm
Huh???? I used spell check......Dew.
If it hurts, you're not dead yet!!!!!


LotusSevenMan

  • Grand Gearhead
  • *****
  • Posts: 852
  • Karma: 0
  • ...._[:]@==<
Reply #5 on: October 31, 2007, 12:59:39 pm
Aluminium is British as opposed to Aloooooooooominum which is not!!! ;D
If it ain't broke-------------------------- fix it 'till it is!

Royal Enfield Miltary 500cc  (2003)
Honda VTR FireStorm (SuperHawk) 996cc 'V' twin
Kawasaki KR1 250cc twin 'stroker
Ducati 916 'L' twin


dewjantim

  • Grease Monkey
  • ****
  • Posts: 430
  • Karma: 0
Reply #6 on: October 31, 2007, 02:33:21 pm
OK, I get it  ;D......Dew.
If it hurts, you're not dead yet!!!!!


dewjantim

  • Grease Monkey
  • ****
  • Posts: 430
  • Karma: 0
Reply #7 on: October 31, 2007, 02:34:42 pm
the one on fleabay, right? Nice looking piece. I guess you know this, but you could ask the seller for the critical dimensions; outside to outside on the mounting lugs, ID of the hole, inside to inside mounting lugs, and height. A photo with a ruler would give you all but one of those.

I'll be interested to hear if it fits, and I promise I won't bid against you.
Promises........Promises.......Dew.
If it hurts, you're not dead yet!!!!!