Author Topic: How to adjust the neutral finder  (Read 4123 times)

0 Members and 1 Guest are viewing this topic.

Spitting Bull

  • Grand Gearhead
  • *****
  • Posts: 543
  • Karma: 0
on: October 16, 2007, 08:12:52 pm
The stop beneath the neutral-finder lever is an eccentric rod with a bolt holding it in position.

Park the bike with some "packing" under the centre-stand, so that the rear-wheel is free to rotate. Loosen the bolt holding the eccentric, turn it so that the "big-side" is down. Now start the engine and engage second gear. Slowly pull the neutral-finder down till it slips out of gear. Turn the eccentric to stop the lever at that position. Tighten the bolt.

Tom
One cylinder is enough for anyone.


dewjantim

  • Grease Monkey
  • ****
  • Posts: 430
  • Karma: 0
Reply #1 on: October 19, 2007, 09:46:48 pm
When mine slips out of adjustment I put it in neutral and adjust the lever all the way down....Dew.
If it hurts, you're not dead yet!!!!!