Members Rides

Winter Ride 3/4 - After snow storm

Members Rides

NField Gear

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 25, 2015, 07:24:23 pm

Login with username, password and session length


Author Topic: Routing New Cable...  (Read 3931 times)

Kevin Mahoney

  • Administrator
  • Grand Gearhead
  • *****
  • Posts: 2,784
  • Karma: 0
Routing New Cable...
« on: October 14, 2007, 11:03:30 pm »
The job can be a bit irksome when it comes to routing the new cable, but this worked for me. After detaching both ends of the broken cable, I tied the transmission end of the old cable to the clutch lever end of the new with a bit of wire, then taped the join with electricianís tape to make a smooth transition. From there it was relatively simple to pull the new wire through all the ties and nooks and crannies.

Who wants to take a fuel tank off anyway? (No kiddig)
Tip courtesy of
Bill Deutermann
Washington, D.C.

Best Regards,
Kevin Mahoney
Classic Motorworks