Members Rides

Follow the brand

Members Rides

NField Gear

Welcome, Guest. Please login or register.
Did you miss your activation email?
October 09, 2015, 07:33:18 pm

Login with username, password and session length


Author Topic: leaky gas cap  (Read 1547 times)


  • Grand Gearhead
  • *****
  • Posts: 2,476
  • Karma: 0
leaky gas cap
« on: October 11, 2007, 06:15:08 pm »
anyone have any ideas on how to get the gas cap to seal better?..
everytime I go for a ride, I have gas all over my tank when I get back.
the paint next to the rubber seal is already gone.. :o

It's a 2007.

and the dealer I got the bike from no longer sells RE's..


« Last Edit: October 11, 2007, 07:38:30 pm by scotty »


  • Grand Gearhead
  • *****
  • Posts: 779
  • Karma: 0
Re: leaky gas cap
« Reply #1 on: October 11, 2007, 07:42:44 pm »
Same thing happens to me. Maybe CMW can come up with an accessory for this, like a better rubber gasket.


  • Grease Monkey
  • ****
  • Posts: 430
  • Karma: 0
Re: leaky gas cap
« Reply #2 on: October 11, 2007, 11:23:57 pm »
Don't know about the later bikes, but my 2000 model has a little hole in the top to release pressure. I noticed it would leak out the hole when the tank was full. The hole is offset so I always make sure that it is at the top of the cap instead of the bottom. No more leaking problems......Dew.
If it hurts, you're not dead yet!!!!!


  • Psalm 23
  • Grand Gearhead
  • *****
  • Posts: 1,067
  • Karma: 1
  • Classic Wannabe
Re: leaky gas cap
« Reply #3 on: October 12, 2007, 08:02:57 am »
My 2006 only leaks when I fill it up too close to the top.

I'd try cutting a second rubber ring gasket and just overlaying the OEM one. It it worked you could glue them together or just leave well enough alone.