Brothers and Sisters:
Colin Cameron, a fellow motorcycle enthusiast, and I made the two-hour trip from Atlanta, GA to Westminster, SC this past Tuesday in search of the red, G5 Deluxe that had been spotted at Richard Evans’ shop – R&D Enfield. Colin and Richard have known each other for some years through the Greater Atlanta British Motorcycle Association (GABMA). Richard and I met for the first time this past week. I will, of course, share with you my first impressions of the G5 in the next paragraphs. However, the trip would have been worthwhile even if the objective had been just to meet Richard, have lunch with him and Colin and simply talk RE motorcycles! In other words, the G5 experience was memorable but it pales in comparison with the time Colin and I spent with Richard Evans!
The G5, as Brother Kevin has noted in this forum, is the UCE in an Electra frame with a modified swing arm. Correct? Well, with all due respect, that description does not quite begin to cover the true meaning and beauty of this new product offering! The Electra looks quickly evaporate due to the Magic Dust that covers this stunning motorcycle. The dusting starts with the new, beefy chromed front (dare I say?) mudguard; it undoubtedly follows with the beautiful UCE power plant; it continues with what appears to be a less busy, modified swing arm; and, it ends with the chromed rear mudguard. I can safely state that for those of us who like the chromed fender looks of a British motorcycle the decision to purchase a G5 or a C5 will not be an easy one. Again, up close and personal, the G5 does not readily (or actually) remind even the informed observer of the Electra.
The pictures we have seen of the new UCE power plant do not really illustrate its quality or beauty. I knelt in front (and both sides) of this new engine for a significant amount of time. (I knew this because my arthritic knees protested as I tried to get myself back on my feet. And, no, I did not say any prayers or made any offerings to the UCE gods while I was on my knees!) Well, going back to the pictures, the quality and the finish of the castings of the engine covers are what we have seen and more. But, the pictures do not show the quality of the finish of the engine and the barrel fins. The fit and finish of these components are equal to those of the Hinckley Bonneville or the W650. (Period.) The muffler… well, there are those who like the super-sized original can… and, for some reason, it is not an eyesore on the G5… but, as in all else in life, beauty is in the eyes of the beholder. The Deluxe G5 in her British Post (Office) Red looks gorgeous in spite of the length of the stock muffler.
Of course, I was not the only one admiring the G5. Colin asked a lot of good questions. Richard very graciously and proudly answered the questions, as he explained everything about the new engine and the new technologies used on it. You could tell that Richard paid a lot of attention during the EFI classes held in Faribault, MN. And, since he, by then, knew of Perla (my 2004 Sixty-5), he gave Colin and me a lot of comparisons between the old and the new RE technologies. Professor Evans put on quite a seminar. This new friend knows his beans! Colin also took a lot of pictures (on film) of the G5 and of us, which he gave to me on Wednesday. (I was going to scan them and add them to this report; however, the friend who owns the scanner is having problems with it; and, since I did not want to delay this report any longer, I decided to post it without the pictures.)
Richard took a telephone call. After that break, I showed him the 14 pictures of Perla I recently placed in the Gallery – he was very complimentary of my bike! Our focus returned to the G5 and our host went through the starting procedure and fired up the bike. The obvious question is: What are the sounds of the UCE like? My response is: What sounds? This is to say that the UCE, unlike the shakes (rattles and rolls) and the metallic sounds we associate to our current REs, is a very smooth and quiet running motor! How’s the exhaust note? Well, on this point, we go back to the true sound of an RE in stock form, of course. Our Forum host has related how the engineers in India toiled to get that familiar RE sound out of the UCE. I believe their efforts met with success. Once opened up, as we typically run our current bikes, I am quite confident that the UCE is going to have the same sound (and the corresponding gains in performance) we are used to hear (and feel) out of our favorite marque of bikes!
What were we hungry for? The three of us walked to the best burger joint in town and our buddy Colin treated Richard and me to lunch. Did we talk about the weather, politics and religion? Well, we did for literally a few minutes! Our conversation quickly and happily returned to the G5 and its UCE. Richard took Colin and me through the extensive and precise PDI process that REM and CMW have outlined for the dealers. There are quality control check points in the PDI process and in the break-in period. This “game changer” of a product, as Kevin calls it, does take quality control practices from concepts to realities! Are you guys ready? Yes sir. Let’s get back to the store. Roger that, Boss!
As we got back, Richard took the key out his pocket and said: “You’re gonna have the privilege of riding a G5 with 30 miles on the clock.” It didn’t take me very long to get my riding gear out my Element or on me! The Boss pointed me to a very quiet section of town that is visible from his shop and, after the warm-up period, I smoothly rolled out of the parking lot for about a five-minute ride at a maximum of 45 MPH at any one point. Well, my friends, in closing… just kidding! My one-word evaluation, as expressed to my buddies once I returned to the store, was: “WOWZAA!!!” Firstly, the pull of the clutch lever is lighter than the one on my 2005 Bonneville! Secondly, the transmission is as smooth and as precise as any tranny you have ever shifted in your riding experiences, my friends! Thirdly, the UCE is truly a 21st century Royal Enfield engine! Fourthly, I do believe there is some real Magic Dust in the “so called” modified swing arm because the handling of the G5 is outstanding! So, there you have it… this is my story… and, I’m sticking to it. (Period.)
In closing, Colin Cameron and I had an absolute ball as we drove to and from Westminster, SC. We sandwiched the round trip with the memorable time we spent with Richard Evans and the G5, its UCE and all else this new bike offers us RE riders. As we left, I said to Richard something like this: When to buy a new RE is in question… knowing where to buy the new RE is not at all in question!
Best regards,
Papa Juan
cc: Colin Cameron
Richard Evans,
R&D Enfield
104 W Piedmont St.
Westminster, SC 29693
864-247-1673
E-Mail: rde@netmds.com
Web:
http://www.enfieldmotorcycles.com/rdenfield/)
Kevin Mahoney, CMW
P.S. The reason for the format of this posting is that I am sending e-mails of the text to Colin Cameron, Richard Evans and Kevin Mahoney.
P.P.S. I include Richard’s phone number, e-mail and web site information for those of you who might wish to contact him, directly.