Author Topic: Spoke to two dealers about C5  (Read 13866 times)

0 Members and 1 Guest are viewing this topic.

r80rt

  • C5 Pilot
  • Grand Gearhead
  • *****
  • Posts: 2,986
  • Karma: 0
  • R.I.P Papa Juan, Uncle Ernie
on: February 22, 2009, 11:40:39 pm
I called my two closest dealers yesterday, they both said they had no idea when the C5 would be available, and also said they wouldn't order any until remaining stocks of old bikes were sold. So I'll have to special order one if I want to see one in the flesh. Any one want a good buy on a Bonneville black?
« Last Edit: February 22, 2009, 11:43:16 pm by r80rt »
On the eighth day God created the C5, and it was better looking than anything on the planet.
Iron Butt Association


Kevin Mahoney

  • Gotten my hands dirty on bikes more than once -
  • Global Moderator
  • Grand Gearhead
  • *****
  • Posts: 3,584
  • Karma: 0
  • Cozy Sidecar distributor/former Royal Enfield dist
Reply #1 on: February 23, 2009, 01:36:28 am
A word to the wise, if they told you that they didn't have any idea when they were coming there is a good chance that they have also not yet gone through training. The G-5 and C-5 will not be avaiiiilable to any dealers who have not been trained. If you want to send me a private message with their dealer names I will let you know.
Best Regards,
Kevin Mahoney
www.cyclesidecar.com


r80rt

  • C5 Pilot
  • Grand Gearhead
  • *****
  • Posts: 2,986
  • Karma: 0
  • R.I.P Papa Juan, Uncle Ernie
Reply #2 on: February 23, 2009, 01:50:39 am
Thanks Kevin, I'm excited about this bike and can't wait to throw a leg over one.
On the eighth day God created the C5, and it was better looking than anything on the planet.
Iron Butt Association


r80rt

  • C5 Pilot
  • Grand Gearhead
  • *****
  • Posts: 2,986
  • Karma: 0
  • R.I.P Papa Juan, Uncle Ernie
Reply #3 on: February 23, 2009, 10:17:09 pm
Kevin, If the C5 won't be available to all dealers, what kind of ordeal will it be for me to find one when I get ready to buy? ???
On the eighth day God created the C5, and it was better looking than anything on the planet.
Iron Butt Association


Kevin Mahoney

  • Gotten my hands dirty on bikes more than once -
  • Global Moderator
  • Grand Gearhead
  • *****
  • Posts: 3,584
  • Karma: 0
  • Cozy Sidecar distributor/former Royal Enfield dist
Reply #4 on: February 24, 2009, 03:34:10 am
The UCE bikes (E-5, G-5 and C-5) will be available to any dealer that wants to sell them and completes training on the new bikes.We would like to think that all of our dealers would make that commitment.
  These bikes are 'deal changers" for Royal Enfield as a company and for Classic Motorworks. I am adamant that dealers need to fully understand and be able to properly prepare and support these new bikes. Most dealers welcome the opportunity for this type of thorough training and they have the same goals as we do.
  I would ask your dealer straight out what their plans are. If they do not want to sell these new bikes, there are plenty of dealers who have been trained and made the commitment to the product.
Best Regards,
Kevin Mahoney
www.cyclesidecar.com


r80rt

  • C5 Pilot
  • Grand Gearhead
  • *****
  • Posts: 2,986
  • Karma: 0
  • R.I.P Papa Juan, Uncle Ernie
Reply #5 on: February 24, 2009, 03:38:40 am
Thanks, I'll call the dealers and find out if they plan to get the proper training.
On the eighth day God created the C5, and it was better looking than anything on the planet.
Iron Butt Association


doomed1

  • The Pirate King
  • Bulleteer
  • ***
  • Posts: 167
  • Karma: 0
Reply #6 on: February 24, 2009, 06:56:51 am
somewhat related: the Motorcycle Warehouse in NJ told me they won't be getting the bikes in until FALL of this year due to some unspecified federal standard that had yet to be met. i called both the brand store in the Twin Cities and UK Motorsports in Long Island, and they both told me that the G5 will be in by early April. i haven't yet called Classic Motorworks yet, but plan on it Thursday. do you know what's up with this? are there some hurdles for the state of New Jersey that have yet to be jumped? i know they have plenty...


r80rt

  • C5 Pilot
  • Grand Gearhead
  • *****
  • Posts: 2,986
  • Karma: 0
  • R.I.P Papa Juan, Uncle Ernie
Reply #7 on: February 26, 2009, 01:17:13 am
Is there a way to find out who is the closest dealer to me, that has had training on the UCE?
« Last Edit: February 26, 2009, 01:18:50 am by r80rt »
On the eighth day God created the C5, and it was better looking than anything on the planet.
Iron Butt Association


Archersix

  • Scooter
  • **
  • Posts: 49
  • Karma: 0
Reply #8 on: February 26, 2009, 02:27:55 pm
Kevin,
Maybe you could list on the dealer page those dealers who have completed the training? I know you don't want troubles with those who haven't/won't do the training. However, it's already hard enough for some of us who live far away from ANY dealers, that would make it easier to shop for the bikes.


exiledcarper

  • Bulleteer
  • ***
  • Posts: 187
  • Karma: 0
Reply #9 on: February 26, 2009, 10:58:16 pm
Well, who's fault is it if any dealer doesn't want to stand behind the product?  I agree, a list of qualified dealers would be most welcomed by prospective EFI buyers.


r80rt

  • C5 Pilot
  • Grand Gearhead
  • *****
  • Posts: 2,986
  • Karma: 0
  • R.I.P Papa Juan, Uncle Ernie
Reply #10 on: February 27, 2009, 01:56:56 am
 I'll buy the first one I find within a reasonable distance.
On the eighth day God created the C5, and it was better looking than anything on the planet.
Iron Butt Association


Kevin Mahoney

  • Gotten my hands dirty on bikes more than once -
  • Global Moderator
  • Grand Gearhead
  • *****
  • Posts: 3,584
  • Karma: 0
  • Cozy Sidecar distributor/former Royal Enfield dist
Reply #11 on: February 27, 2009, 03:08:40 am
We have planned to do this, I suggest that you write to our resident web nurd Rhett and ask him to get on the stick.
rw@classicmotorworks.com
Best Regards,
Kevin Mahoney
www.cyclesidecar.com


whitey

  • Scooter
  • **
  • Posts: 49
  • Karma: 0
Reply #12 on: February 27, 2009, 01:28:15 pm
Both Gene and I attended the training and cannot wait to be involved with such a wonderful achievement by the company..

We are fully commited to the UCE and will be stocking new models asap.

I contacted some friends in the UK and the feedback for the UCE is very positive.

Congratulations to all who took this from conception to completion.

Personally .....I want one too... ;D

Paul White

Holopaw Fl



Alaroyal

  • Bulleteer
  • ***
  • Posts: 173
  • Karma: 0
Reply #13 on: February 27, 2009, 03:46:29 pm
Paul;

Sounds like you are a RE dealer.  If so, where are you and what is your contact info?

Both Gene and I attended the training and cannot wait to be involved with such a wonderful achievement by the company..

We are fully commited to the UCE and will be stocking new models asap.

I contacted some friends in the UK and the feedback for the UCE is very positive.

Congratulations to all who took this from conception to completion.

Personally .....I want one too... ;D

Paul White

Holopaw Fl


Dave

"The reason most people don't recognize opportunity when it knocks, is because opportunity almost wears work clothes."


The Garbone

  • Shade Tree
  • Grand Gearhead
  • *****
  • Posts: 3,978
  • Karma: 0
  • User Complaints: 22
Reply #14 on: February 27, 2009, 08:26:30 pm
Both Gene and I attended the training and cannot wait to be involved with such a wonderful achievement by the company..

We are fully commited to the UCE and will be stocking new models asap.

I contacted some friends in the UK and the feedback for the UCE is very positive.

Congratulations to all who took this from conception to completion.

Personally .....I want one too... ;D

Paul White

Holopaw Fl



So Paul,  when should I plan my trip to Holopaw?


Dave,
Here is a link to to what I believe is his shop..=======> Linky<======    It might take a few seconds to load up.

I think that is him mowing the lawn....
« Last Edit: February 27, 2009, 08:32:14 pm by The Garbone »
Gary
57' RE Crusader 250
67' Ford Mustang
74' Catalina 27 "Knot a Clew"
95 RE Ace Clubman 535
01 HD 1200 Custom
07 RE 5spd HaCK

* all actions described in this post are fictional *


Vince

  • Grand Gearhead
  • *****
  • Posts: 1,693
  • Karma: 0
Reply #15 on: February 28, 2009, 12:07:42 am
     I'm sure all the dealers I mentioned in my UCE Seminar at Vince's thread either have, or have on the way, The new bikes. mine were shipped yesterday. I'll have them next week.


r80rt

  • C5 Pilot
  • Grand Gearhead
  • *****
  • Posts: 2,986
  • Karma: 0
  • R.I.P Papa Juan, Uncle Ernie
Reply #16 on: February 28, 2009, 12:11:19 am
Are any of you trained dealers anywhere close to Arkansas?
On the eighth day God created the C5, and it was better looking than anything on the planet.
Iron Butt Association


Vince

  • Grand Gearhead
  • *****
  • Posts: 1,693
  • Karma: 0
Reply #17 on: February 28, 2009, 12:24:38 am
     I used the dealer locator to find Scoot-N-Scooters and Classic sports in Arkansas. If they are not certified, try Perry's M/C in ft worth Texas. I know he is certified because he attended the seminar here.


r80rt

  • C5 Pilot
  • Grand Gearhead
  • *****
  • Posts: 2,986
  • Karma: 0
  • R.I.P Papa Juan, Uncle Ernie
Reply #18 on: February 28, 2009, 12:35:45 am
Thanks, I've spoken to the two dealers in Arkansas, it appears they are not trained on the UCE.
On the eighth day God created the C5, and it was better looking than anything on the planet.
Iron Butt Association


Blue Ridge Wheeltor

  • Grand Gearhead
  • *****
  • Posts: 1,309
  • Karma: 0
Reply #19 on: February 28, 2009, 02:13:26 am
REA #25
2008 Royal Enfield Deluxe (Blue)
2006 Ural Patrol
1978 BMW R 100s--SOLD--
1977 HD XLCR
1971 Triumph Bonneville


Kevin Mahoney

  • Gotten my hands dirty on bikes more than once -
  • Global Moderator
  • Grand Gearhead
  • *****
  • Posts: 3,584
  • Karma: 0
  • Cozy Sidecar distributor/former Royal Enfield dist
Reply #20 on: February 28, 2009, 07:15:05 pm
Rhett has partially completed inserting a "EFI certified" logo next to those dealers who have been trained. You may note that Vince's store does not have one yet, but he is a fuly certified UCE dealer and will ahve bike quite soon. By Monday or Tuesday they should all be up. In Texas both Perrys in Ft. Worth and Naplam in Austin are certified. We will be opeing a new dealership in Houston who will be trained by the end of this month.
Best Regards,
Kevin Mahoney
www.cyclesidecar.com


Cabo Cruz

  • Papa Juan
  • Grand Gearhead
  • *****
  • Posts: 2,331
  • Karma: 0
Reply #21 on: March 01, 2009, 08:31:20 pm
Thanks, Rhett and Kevin!
Long live the Bullets and those who ride them!

Keep the shiny side up, the boots on the pegs and best REgards,

Papa Juan

REA:    Member No. 119
BIKE:   2004 Royal Enfield Sixty-5
NAME: Perla


whitey

  • Scooter
  • **
  • Posts: 49
  • Karma: 0
Reply #22 on: March 02, 2009, 09:25:16 pm
Hi , i havent seen a pic of me mowing the lawn ,, but we do have a lot of it( 20 acres)
arrgghh.

We are located in Holopaw on 441 , just off 192 about 30 miles from Orlando and 30 miles from Melbourne.

We have a few interested parties in the UCE and so are trying to finalise the deal to ship in numbers.

Currently we have all models in AVL configuration on the floor.

Paul, ,  ;D


magus

  • Scooter
  • **
  • Posts: 4
  • Karma: 0
Reply #23 on: March 31, 2009, 02:16:15 am
Kevin

Any update on the Houston dealer? That would be fantastic for those of us down here.

David


Rhett has partially completed inserting a "EFI certified" logo next to those dealers who have been trained. You may note that Vince's store does not have one yet, but he is a fuly certified UCE dealer and will ahve bike quite soon. By Monday or Tuesday they should all be up. In Texas both Perrys in Ft. Worth and Naplam in Austin are certified. We will be opeing a new dealership in Houston who will be trained by the end of this month.


Frenchy

  • Bulleteer
  • ***
  • Posts: 102
  • Karma: 0
Reply #24 on: April 01, 2009, 10:40:55 am
It's nice to know that my "EFI Certified" dealership is only 48 miles away!  ;)

Way to go fellas at "Interstate".
'On this world beneath the moon,
When Mercury is in the ascendant,
The isle of Scotland will produce a leader,
Who will cause the English discomfort.'
 
Nostradamus (Verse 93)


motorcyclewhse

  • Neophyte
  • *
  • Posts: 1
  • Karma: 0
  • We Build Unique Enfields
Reply #25 on: April 13, 2009, 02:31:05 am
somewhat related: the Motorcycle Warehouse in NJ told me they won't be getting the bikes in until FALL of this year due to some unspecified federal standard that had yet to be met. i called both the brand store in the Twin Cities and UK Motorsports in Long Island, and they both told me that the G5 will be in by early April. i haven't yet called Classic Motorworks yet, but plan on it Thursday. do you know what's up with this? are there some hurdles for the state of New Jersey that have yet to be jumped? i know they have plenty...
I don't know who he spoke to at Motorcyclewhse. I am the owner. We plan to attend the training on the new models. There are two of us at the shop and we are both aware that the bikes are available now and we are not aware of any requirements that have not been met in the state of NJ. Just posting to set the record straight. I am sure we could order the bikes in now if someone is ready to purchase.


The Garbone

  • Shade Tree
  • Grand Gearhead
  • *****
  • Posts: 3,978
  • Karma: 0
  • User Complaints: 22
Reply #26 on: April 13, 2009, 03:38:06 am
Hi , i havent seen a pic of me mowing the lawn ,, but we do have a lot of it( 20 acres)
arrgghh.

We are located in Holopaw on 441 , just off 192 about 30 miles from Orlando and 30 miles from Melbourne.

We have a few interested parties in the UCE and so are trying to finalise the deal to ship in numbers.

Currently we have all models in AVL configuration on the floor.

Paul, ,  ;D

Ok,  here is the picture cropped from Google Earth...kinda creepy...




If I get some time I will be heading your way in a week or so.  Want to take a gander at those hack rigs you got there...
Gary
57' RE Crusader 250
67' Ford Mustang
74' Catalina 27 "Knot a Clew"
95 RE Ace Clubman 535
01 HD 1200 Custom
07 RE 5spd HaCK

* all actions described in this post are fictional *


Bullet Bill

  • Scooter
  • **
  • Posts: 71
  • Karma: 0
Reply #27 on: April 13, 2009, 04:33:55 am
I dunno, that's not a very good photo... think maybe they could get a view up your nostrils from outer space?  ... Creepy, indeed.
There's something that doesn't make sense... let's go and poke it with a stick.


singhg5

  • Grand Gearhead
  • *****
  • Posts: 2,785
  • Karma: 0
Reply #28 on: April 15, 2009, 02:02:49 am
I don't know who he spoke to at Motorcyclewhse. I am the owner. We plan to attend the training on the new models. There are two of us at the shop and we are both aware that the bikes are available now and we are not aware of any requirements that have not been met in the state of NJ. Just posting to set the record straight. I am sure we could order the bikes in now if someone is ready to purchase.
[/quote]

Mark and Ryan : Glad to hear that you will be able to get UCEs.  You have quite a bike there in the picture. Had read about it in one of the RE blogs.
 
1970's Jawa /  Yezdi
2006 Honda Nighthawk
2009 Royal Enfield Black G5


magus

  • Scooter
  • **
  • Posts: 4
  • Karma: 0
Reply #29 on: April 29, 2009, 07:18:58 pm
So about that Houston dealer??? You'd think the 4th largest city in the US would be able to field one RE dealer ??? ??? ???

By the way, "Napalm MotorSports is the #1 Royal Enfield Dealer in The United States." - this off of the Austin, TX dealer's sire -- is this true???
« Last Edit: May 01, 2009, 10:30:08 pm by magus »