Ace, that was brilliant , as usual. Believe me , I'm NO mechanic and I could follow along without stopping to re-read any part of it. Your tech articles are the first things I look at when I log on. Keep'em coming and thanks. Chuck.
ace- somebody is going to ask, so hear it is. - Mike
Message for AceI have checked the cam timing on my 612cc 2008 Classic with standard cams and the results seem so far out that maybe i am doing something wrong!Inlet:- open 28 BTDC & close 42 ATDCExhaust:- open 58 BTDC & close 10 ATDCLift on inlet was 0.287" & on exhaust 0.260"0.012" gap between rocker & valve top and ran 3 cycles with same result within 1-2 degrees.Any ideas? Regards, David Gee.
Hi Ace,have replaced cams! Timing is:- Inlet open 34 close 60 and Exhaust is open 60 and close 19. Lift is ok at 0.298/.299". I would imagine that these are suitable for your timing mod ? Regards, David Gee.
Page created in 0.103 seconds with 34 queries.