Author Topic: The 612 conversion kit  (Read 26885 times)

0 Members and 1 Guest are viewing this topic.

HMR

  • Scooter
  • **
  • Posts: 74
  • Karma: 0
Reply #30 on: September 18, 2007, 08:16:26 am



Here is my pride and joy, a 2003 Bullet Military:


Pete.
Nice bike.

Is the carb-filter assembly attached only to the intake port? I use a Mikuni 32 mm with a Pipercross pod type filter and have had to make a bracket bolted to the rear tank mount to support the heavier carb  as the flange as well as the rubber manifold cracked with the weight nd vibrations.

Thanks
HMR


Peter

  • Bulleteer
  • ***
  • Posts: 143
  • Karma: 0
Reply #31 on: September 18, 2007, 10:59:10 pm
I have an Amal 30mm and an alloy manifold.
No other attachments and no problems so far.
(The second picture shows an in-line spin-on oil filter, in case someone notices)

Peter

[old attachment deleted by admin]
« Last Edit: September 18, 2007, 11:04:50 pm by Peter »