3. mikcarb vm 28/ tuning options
« previous next »
Pages: [1]   Go Down

Author Topic: mikcarb vm 28/ tuning options  (Read 1693 times)

0 Members and 1 Guest are viewing this topic.

Linnfried

  • Neophyte
  • *
  • Posts: 1
  • Karma: 0
mikcarb vm 28/ tuning options
on: February 06, 2019, 01:40:20 pm
hi,

the mikcarb on my bullet 500 ES obviously only has ONE throttle stop screw, not an air screw. is that normal? i'd like to adjust the idling a bit. no idea where to start... 8(

thanks for any kind of hint and tips.

Linnfried
Logged
linnfried

ace.cafe

  • Grand Gearhead
  • *****
  • Posts: 14,457
  • Karma: 1
  • World leaders in performance/racing Bullets
Re: mikcarb vm 28/ tuning options
Reply #1 on: February 06, 2019, 02:42:38 pm
No, not normal.
If it has no air screw, it is not a Mikarb.

The air bleed screw is typically a smaller angled shrouded screw an inch or so from the large throttle stop screw toward the mouth of the carb.
Same location as Mikuni.
Logged
Home of the Fireball 535 !

longstrokeclassic

  • Grand Gearhead
  • *****
  • Posts: 900
  • Karma: 0
Re: mikcarb vm 28/ tuning options
Reply #2 on: February 06, 2019, 04:55:54 pm
Logged
Never underestimate the value of improved combustion efficiency and reducing parasitic engine and rolling chassis losses.

Pages: [1]   Go Up
« previous next »
  3. mikcarb vm 28/ tuning options
 


  • The Unofficial Royal Enfield Community Forum website is a fan-driven project, not affiliated with Royal Enfield Motors.

Page created in 0.058 seconds with 32 queries.