Nice B.W.!
nOw comes the question... what does a stock 1996 Enfield Bullet have for a head gasket, is it copper, or composite? I have a leak from my push rod tubes, and it is weeping oil gradually across the engine to the left side. Do I have a copper gasket that I can tippy tap with my Silver Hammer, or is it composite, necessitating the removal of the head and lapping the spigot and barrel while I am at it. I have a nice Simonds single cut flat bastard that would make short work of the .024" clearance needed to compress the composite gasket I would replace it with.
Charlie