aboard

Author Topic: Bobber Bits  (Read 886 times)

0 Members and 1 Guest are viewing this topic.

geichal

  • Grease Monkey
  • ****
  • Posts: 471
  • Karma: 0
  • REA #64 ...not quite done, but close...
on: May 08, 2017, 09:40:29 pm
I was going through my stash and am realizing my vision has changed many times over the years leaving my with quite a collection of parts.  I have tail lights, headlights, handle bars, makings for an external oil filter, breather mods, misc. engine parts, including an extra set of cases.  I also have a couple sets of riding gloves. I like to trade, some stuff I'll donate to a good cause.  If your looking for something, drop me a line and I'll see what I got.
Best!
Geichal


mevocgt

  • Grand Gearhead
  • *****
  • Posts: 996
  • Karma: 0
Reply #1 on: May 09, 2017, 08:27:00 am
Are those engine cases iron or UCE?
If Iron, which side tranny?
Thnks...


geichal

  • Grease Monkey
  • ****
  • Posts: 471
  • Karma: 0
  • REA #64 ...not quite done, but close...
Reply #2 on: May 09, 2017, 06:11:30 pm
Ironhead, tranny was separate-preunit. I believe it was the back-up for the DRS land speed bike (that's what the guy said that I got it from)


mevocgt

  • Grand Gearhead
  • *****
  • Posts: 996
  • Karma: 0
Reply #3 on: May 09, 2017, 09:22:11 pm
I guess I am asking the question wrong, is it a right hand or left hand shift is what I meant...


geichal

  • Grease Monkey
  • ****
  • Posts: 471
  • Karma: 0
  • REA #64 ...not quite done, but close...
Reply #4 on: May 09, 2017, 09:43:09 pm
RH, the cases are for the mill only, I don't have an extra tranny. Was planning on building a second hot rod engine, but career change negated that.


Hoosier Bullet

  • Scooter
  • **
  • Posts: 69
  • Karma: 0
Reply #5 on: December 08, 2017, 12:55:42 pm
RH, the cases are for the mill only, I don't have an extra tranny. Was planning on building a second hot rod engine, but career change negated that.

Interested in the engine cases.  Send me a PM if they are still available.