Author Topic: Interesting project.  (Read 2919 times)

0 Members and 1 Guest are viewing this topic.

malky

  • Grand Gearhead
  • *****
  • Posts: 2,758
  • Karma: 0
  • Team Rough Inferior.
I was Molly Sugdens bridesmaid.

Spontaneity is the cure for best laid plans.
‘S Rioghal Mo Dhream


Adrian II

  • Grand Gearhead
  • *****
  • Posts: 4,143
  • Karma: 1
  • Sharing my ignorance with anyone who needs it
Reply #1 on: April 23, 2017, 10:12:22 pm
B.W. was using the con-rod from one of these in his 350 racer before the short-stroke engine was fitted.

A.
Grumpy Brit still seeking 500 AVL Bullet perfection! Will let you know if I get anywhere near...


malky

  • Grand Gearhead
  • *****
  • Posts: 2,758
  • Karma: 0
  • Team Rough Inferior.
Reply #2 on: April 24, 2017, 03:52:47 pm


NOTE: By enlarging the ebay photo I count only nine barrel fins. But it might be the camera angle hides a top fin?

?
I was Molly Sugdens bridesmaid.

Spontaneity is the cure for best laid plans.
‘S Rioghal Mo Dhream


Jon

  • Bulleteer
  • ***
  • Posts: 140
  • Karma: 0
Reply #3 on: May 03, 2017, 11:26:36 pm
I was told by a former RE employee that a number of unsold New Bullets were converted to Crusader spec in order to sell in the UK market. The same chap also claimed that there was a sports prototype similar to the Continental GT. I've seen one photo of a US spec New Bullet wearing a separate chrome headlamp rather like the Continental ( not the GT ) UK versions seem to have worn the Casquette.
 


royaloilfield

  • Scooter
  • **
  • Posts: 23
  • Karma: 0
Reply #4 on: May 17, 2017, 02:58:14 am
I have a new bullet 350 in a conti gt frame.  and I know of one other one in Canada....Def has more fins than 250 and supposed beefier gear box???