Author Topic: Electrical Contact Enhancer  (Read 1676 times)

0 Members and 2 Guests are viewing this topic.


  • A 2x4. My kingdom for a 2x4.
  • Grand Gearhead
  • *****
  • Posts: 2,112
  • Karma: 0
on: April 06, 2016, 07:55:35 am
   I've not seen it on the NField Gear site.
   Considering the frequency which many of us have found poor contact and/or had to re-rack one or more connectors, an Electrical Contact Enhancer of any brand just makes sense.
   Here is my link to my post in Tech Tips:,23453.0.html

   I use Stabilant22 as mandated every time I re-rack a connector on the Airbus helicopters. Considering the vibration inherently produced by a helo, and the effectiveness of the enhancer compared to a helo without it, if it works on helos it's guaranteed to work on a bike!  ;D
   And even a 5ml bottle goes a very long way!  8)
'18 Bonneville T-100, Blue/White
'12 C5 Classic
'06 Electra X AVL w/32mm Mikuni and Gold Star system.


  • Bulleteer
  • ***
  • Posts: 200
  • Karma: 0
Reply #1 on: September 28, 2016, 10:52:43 pm
I religiously use Jet Lube 12/34 for all my electrical work. This contact enhancer/cleaner/preservative is the best I've ever used and is perfect for any electrical application. Damn good fer cleaning guns as well. ;)
Nothing better than a nice putt on an RE.
It's a serene way to travel at an unhurried pace.

-2013 Classic Maroon-