Ah thanks for the suggestion Cafe, I spoke with H
Ice, I want to remove the solenoid all together.
I have removed the HT lead going to the starter motor and the electronic ignition which was connected into the started motor HT lead.
I notice there was a red wire going to the left hand side of the solenoid ( positive ). I traced where this red wire went, it goes to the positive side of the battery.
There is also two wires going into the solenoid, a blue wire and also a white wire. I traced the blue wire and white wire back to a block connector, the other side of the block connector is a blue wire and a black wire.
Is it ok for me to remove the red positive wire from the battery to solenoid? Can I remover the actual solenoid? And disconnect back to the block connector ?