Author Topic: Sparx  (Read 1715 times)

0 Members and 1 Guest are viewing this topic.

mike704

  • Scooter
  • **
  • Posts: 59
  • Karma: 0
on: August 19, 2008, 01:03:38 pm
I just got a new sparx three phase alternator and regulator/rectifier (at a steal) to replace my busted stock alternator (07 with 4 wires). has anyone else put one on, and have a rough wiring diagram or photos? I have rewired entire bikes before when I have had to, and would like to avoid doing so again if at all possable.
2007 Military (My only vehicle)


Blltrdr

  • Grand Gearhead
  • *****
  • Posts: 2,079
  • Karma: 0
  • cycle-delic music
Reply #1 on: August 31, 2008, 06:40:38 pm
 I put a Sparks alternator in my bike. Your problem is the stock Alternator has a separate A/C lighting circuit. That's why there are 4-wires on the stock alt. Your Sparks only has 3-wires. I rewired my bike following Pete Snidal's Brit rewire article found at his website, www.angelfire.com/biz/snwvlly/bikes/. Good luck
2003 Classic 500 5 spd
2009 HD FLHT Police 103 6 spd
1992 Kawasaki ZG 1200 Voyager XII


mike704

  • Scooter
  • **
  • Posts: 59
  • Karma: 0
Reply #2 on: September 02, 2008, 09:37:10 am
I just rewired the headlight through the dc system. about the same as a modern bike
2007 Military (My only vehicle)