[Damon]

Hi,
 
I've been in the iron barrel forum for a while. I have a 2005 bullet with the continental kit and I just rebuilt the motor into a 612. I love the bike but it's pretty much done. There isn't anything really left to do. So....
It looks like I am going to become the owner of a 1965 series 1 interceptor! It needs some work but is all there and has no dents I'm told.
It belongs to my Uncle, he owns a Cam Grinding business and specializes in British flat track motors. As soon as I get some pictures I will post.
 I just wanted to introduce myself to this section and say I look forward to adding the big twin to my stable!!

Damon

[Arizoni]

Glad to hear of your good fortune.  Don't forget to post pictures of it on the forum.

[Don]

There is an active Interceptor forum on yahoo. Many knowledgable contributors. It also has a related Interceptor website.
Don
https://groups.yahoo.com/neo/groups/RE_Interceptor/info
http://www.ozemate.com/interceptor/

[Damon]

I sent a request to join that group and haven't heard from them.
 On another note, the first steps have begun. I ordered a new 8' x 12' shed to build into my restoration shop. I only have a one car garage and my wife's convertible is in there. So this gives me dedicated space for wrenching on bikes. I also bought a motorcycle lift table from Harbor Freight to go in there.
 I am bringing the bike home in 3 weeks. So I will post starting pics then!
Damon

[Damon]

So got my shed built and my lift in. I'm going to pick up the Interceptor Saturday morning!

[High On Octane]

That's good stuff right there!  Excited to see how the Interceptor comes out. 

[ERC]

All you need now is some insulation and heat for the winter.  ERC

[Damon]

Here we are on our way home:

And here it is in its new spot, ready for work!

[High On Octane]

Cool! 

Are those wall studs for the shed at 3' spacing?  Probably fine for a shed, but have never seen them so far apart before.  Did you happen to run electrical out to there?

Regardless, excited to see you get this bike back to life. 

[Damon]

The side wall in the shed are 24" on center and the back wall is weird so it doesn't really have any fraing. It was a shed kit I bought at Home Depot.
My next project is running electrical. Gotta get that before I can do any real work on the bike.

Damon

[ace.cafe]

Exciting!
 

You have quite a project ahead of you!
Should be a lot of fun!

[Damon]

So I decided to mock up everything to see what if anything is missing and this is where I left off for the day.
Damon

[ERC]

Pretty good looks like most of it is there. ERC

[Damon]

Yeah I think everything's by is there. Less some fasteners, front seat brackets, rear tank bracket and the tool box covers.

[grumbern]

Sweet!