[bullethead63]

Hello,all...it's been a while,but I've FINALLY found about 95% of the parts that I need to start the project!I have a clean title,and most of the hard-to-find parts...the hardest were the headlight,dash,and engine guard...I still have a Trailblazer front fender,because the Chief/Patrol Car fenders are so scarce...check out the pix...I still need a wiring harness (may have to build one),but have a second (damaged) dash,cocktail shaker exhausts,decent headers,a working Lucas K2F magneto,two better condition 16" wheels,original NOS Lucas ignition switch and headlight switch,perches and levers,cables,a spare transmission,a second speedo (120 MPH)/LOTS of chrome brackets and mounting plates,centerstand,grips,throttle,tool boxes,battery carrier,rectifier,horn,triple tree (nice and shiny), a bobbed rear fender (thanks,Tom!),so I can make one decent one,LOTS of nuts and bolts,spare front and rear hubs,chrome speedo drive,horn button,kill switch...jeez...anyone have any leads on who can build me a "Proper",color correct,English wiring harness?Any spare Chief parts out there?Advice?Warnings?

[bullethead63]

Here's the bike...she's kind of rough ...

[bullethead63]

...and here's the 150 MPH speedo...needs a refurb,for sure...

[grumbern]

Looks like a decent foundation. I didn't have that much at the beginning (allso a 59).
Some parts can still be found at HMC (not too much though, but they have a bunch of the Indian badges, a harness for the Connie and such) and Phil Doland hast just made new rubbers. The "Aztec"-head for the nacelle can be found at Starklites (good quality, I got mine there). Good thing you have a complete headlamp and some of the harder to find parts. Bad your fenders are missing/chopped.

If you need any general advise, I'd be happy to help, since I have learned quite a bit in the last months and still am.
I sent you a pm.
Andreas

[bullethead63]

Thanks,Andreas!

[ERC]

Not to be picky but if you want it to be an original Chief they used a distributor not a mag.  ERC 

[High On Octane]

ERC is correct, it should have the SR2 distributer.  Either way, glad to see you making some progress. 

[grumbern]

Hi,
to be completely correct, the SR2 is the magneto and it should have a 18D2, if I'm not wrong
Have you gotten my mail?
Andreas