Author Topic: Need throttle cable for 32mm Mikuni carb  (Read 1687 times)

0 Members and 1 Guest are viewing this topic.

dmerc

  • Scooter
  • **
  • Posts: 94
  • Karma: 0
on: February 09, 2015, 12:07:55 am
 My cable is missing.  Are these the same as the stock Enfield cable or is it different. If so is the cable available here?


ace.cafe

  • Grand Gearhead
  • *****
  • Posts: 14,457
  • Karma: 1
  • World leaders in performance/racing Bullets
Reply #1 on: February 09, 2015, 12:13:08 am
You can use a stock cable, but it is a tight fit for length.
Home of the Fireball 535 !


rvcycleguy

  • Grease Monkey
  • ****
  • Posts: 298
  • Karma: 0
Reply #2 on: February 09, 2015, 04:09:59 am
My cable is missing.  Are these the same as the stock Enfield cable or is it different. If so is the cable available here?

Where did it go missing? 
1956 Bullet 500 (G2) Custom tank, Silencer Muffler, Powder Coated Chassis
2006 Suzuki Boulevard C50 (800cc) Touring set-up. white walls, pearl white w/ ghost flames


dmerc

  • Scooter
  • **
  • Posts: 94
  • Karma: 0
Reply #3 on: February 09, 2015, 02:32:33 pm
Where did it go missing?
Well, you know. Buy a bike that has all the small bits in a box. Lots of things missing or installed wrong. It's all part of the fun!


Hondo

  • Bulleteer
  • ***
  • Posts: 174
  • Karma: 0
Reply #4 on: February 25, 2015, 06:29:59 pm
My first two bikes were bits in a box!  I learned more about bikes from those two than all the others I've owned combined!


mikail gransee

  • Grand Gearhead
  • *****
  • Posts: 518
  • Karma: 0
Reply #5 on: February 28, 2015, 06:24:58 pm
 Try Hitchcocks Motorcycles, their awesome!


http://www.hitchcocksmotorcycles.com/home
-"ONCE YOU STOP CONTRIBUTING, YOU BEGIN TO DIE",   -ELENOR ROOSEVELT

1999 Enfield Bullet
1977 Yamaha xs360 TD
1978 Yamaha xs 400 D
2005 Yamaha YZF 600R
2007 Honda CBR 1000RR


dmerc

  • Scooter
  • **
  • Posts: 94
  • Karma: 0
Reply #6 on: February 28, 2015, 09:48:53 pm
I ended up ordering the cable that sudco sells with their 32MM kit for the Enfield. Had to make a little bushing but it all worked out.