coool!
so ive just put all back together and the weird thing now is that there is absolutely no movement in the swing arm. the other day there was and i couldnt get it any tighter, but taking it off and putting it on did something.
I may even have the brake right. really got in there with brake cleaner , gresed cams and now what ive done is something so maori as a temp fix that im too embarressed to take pix of it.
i had a spare nut, that massive one of about 26mm that sits on the insideof the arm and on the brake plate., of course this fits that same thread as they share it, so ive used that now as the brake plate nut, but ive jammed a tiny nut under the bolt and tightened that brake plate nut so tight. there can be no movement now. none. got a really vibe about this. she might work, but of course i dont wanna leave it like that.
i think the whole problem was movement. in the swing arm and on that brake plate slot.
i think RE should re think that slot. why is it so much wider than the pivot bolt?