I've received a set of washers along with a set of internal lock washers to "fix" the shock problem. Unfortunately, it did not close the large gap shown in the above pics. Is it possible that the bushing (black rubber) was installed in the wrong sequence? If anyone has a picture of their lower shock attach points to show me Id appreciate seeing the correct installation.Thanks.
thanks Leonard.Is the washer that is sitting just under the nut of larger diameter than the shock openning? If so, that could very well be what is wrong with mine. I didn't post new pictures of mine with the added washers because it would appear just like my earlier pictures.little ao
Page created in 0.123 seconds with 32 queries.